| Document Number |
|
Document Title |
|
OEM |
| 037-0132-000 |
|
Application of Protective Organic Finishes |
|
Sundstrand |
| 14196B |
|
Coating Specifcations |
|
Korry Electronics |
| 14196C |
|
Wet Process Finish |
|
Korry Electronics |
| 19207 |
|
Chemical Agent Resistant Coatings (CARC) |
|
Ulven Forging |
| 207-9-414 |
|
Enamel, Aliphatic Polyurethane |
|
Vought |
| 207-9-470 |
|
Fluid Resistant, Epoxy-Polyamide Exterior Primer |
|
Vought |
| 208-13-40 |
|
Peening, Shot and Glass Bead |
|
Vought |
| 208-14-11 |
|
Fluorescent Penetrant Inspection |
|
Vought |
| 208-14-13 |
|
Process Specification for Penetrant Inspection |
|
Vought |
| 208-4-2 |
|
Process Specification for Surface Preparation of Titanuim, Phosphate-Fluoride Method |
|
Vought |
| 208-4-5 |
|
Process Specification for Processing of Titanium Alloys |
|
Vought |
| 208-5-20 |
|
Nickel Electroless |
|
Vought |
| 208-9-100 |
|
Process Specification for Aluminum and Aluminum Alloys, Cleaning and Etching of |
|
Vought |
| 208-9-143 |
|
Application of Fluid Resistant, Epoxy-Polyamide, Exterior Primer |
|
Vought |
| 5PTPAL08 |
|
Shot Peening of Metal Parts |
|
Lockheed |
| 5PTPCG06 |
|
Requirements for Penetrant Inspection Procedures |
|
Lockheed |
| 5PTPCL01 |
|
Magnetic Particle Inspection, Requirements For |
|
Lockheed |
| 5PTPCL02 |
|
Penetrant Inspection General Requirements For |
|
Lockheed |
| 5PTPCT19 |
|
ABF Etch Inspection ot Titanium Alloys |
|
Lockheed |
| 5PTPGG01 |
|
Requirements for Etch / Cleaning Prior to Penetrant Inspection |
|
Lockheed |
| 5PTPGL01 |
|
Cleaning of Titanium and Titanium Alloys |
|
Lockheed |
| 5PTPHG16 |
|
Conversion Coating of Titanium Alloys |
|
Lockheed |
| 5PTPHL12 |
|
Hard Anodizing of Aluminum and Aluminum Alloys |
|
Lockheed |
| 5PTPHL17 |
|
Phosphate Coating for Ferrous Metals |
|
Lockheed |
| 5PTPHL18 |
|
Chemical Protective Film Treatment for Aluminum and Aluminum Alloys |
|
Lockheed |
| 5PTPTT02 |
|
Fracture/Durability Critical Parts, General Specification for Control Of |
|
Lockheed |
| ABP1-2028 (19d) |
|
Shot Peening for Improved Fatigue and Stress Corrosion Resistance |
|
Airbus |
| ABP1-2344 (12, 12u ) |
|
Blasting |
|
Airbus |
| ABP1-3038 (4x) |
|
Deposition of Zinc By Spraying |
|
Airbus |
| ABP1-5057 (4r) |
|
Conversion Coating Of Aluminum |
|
Airbus |
| ABP6-5230 (3c) |
|
Testing By Penetrant Flaw Detection |
|
Airbus |
| ABP8-1290 |
|
Cleaning and Degreasing of Metallic Materials (Alkaline) |
|
Airbus |
| ABP8-1294 |
|
Cleaning & Degreasing of Metallic Materials (Vapour) |
|
Airbus |
| ABP8-1296 |
|
Deoxidtioin of Aluminum Alloys |
|
Airbus |
| ABP8-2299 (12l) |
|
Pickling of Titanium Alloys |
|
Airbus |
| AMS-A-8625 |
|
Anodic Coatings for Aluminum and Aluminum Alloys |
|
Aerospace |
| AMS-C-26074 |
|
Coatings, Electroless Nickel, Requirements for |
|
Aerospace |
| AMS-C-27725 |
|
Coating, Corrosion Preventative, Polyurethane for Aircraft Integral Fuel Tanks for Use to 250 degrees F (121 degrees C) |
|
Aerospace |
| AMS-C-5541 |
|
Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
|
Aerospace |
| AMS-H-6875 |
|
Heat Treatment of Steel Raw Materials |
|
Aerospace |
| AMS-QQ-C-320 |
|
Chromium Plating (Electrodeposited) |
|
Aerospace |
| AMS-QQ-N-290 |
|
Nickel Plating (Electrodeposited) |
|
Aerospace |
| AMS-QQ-P-35 |
|
Passivation Treatments for CRES |
|
Aerospace |
| AMS-QQ-P-416 |
|
Plating, Cadmium (Electrodeposited) |
|
Aerospace |
| AMS-S-13165 |
|
Shot Peening of Metal Parts |
|
Aerospace |
| AMS12 |
|
Material Specification - Primer and Paint |
|
Aim Aviation |
| AMS2404 |
|
Electroless Nickel Plating |
|
Aerospace |
| AMS2418 |
|
Plating, Copper |
|
Aerospace |
| AMS2419 |
|
Cadmium-Titanium Plating |
|
Aerospace |
| AMS2486 |
|
Conversion Coating of Titanium Alloys; Fluoride-Phosphate Type |
|
Aerospace |
| |
|
|
|
|
